ONTAP ROAM™ Ultimate Rig Kit

Included

1 × ONTAP ROAM™ complete system with 16L tank + 1 × spare 16L tank + 2 × ONTAP Lockable Holders.

Total water capacity: 32L across two interchangeable 16L tanks. One ROAM™ pump housing is shared between the tanks.

ONTAP ROAM™ COMPLETE SYSTEM

• Water Tank Capacity: 16L
• Rinse Time: Up to 6 minutes of shower/rinse time from a single 16L tank
• Pressure / Flow Rate: 40 PSI / 2.6L per minute
• Power: Integrated rechargeable battery; no vehicle power connection required during use
• Battery Capacity / Runtime: 3200mAh / 34.5Wh; 120 minutes runtime per charge
• Charging Input: USB-C, 4.5–20V / 3A
• Charging Time: Approximately 75 minutes at 3A (fast charging)
• Modular Design: Interchangeable water tanks using the quick-release latch system
• Quick Connectors: Valved and watertight
• Spray Gun: 10 functions
• Dimensions: W17.9cm × L34.8cm × H46.0cm
• Materials: Food-grade, UV-stabilised materials
• Water / Dust Resistance: IP65 rated
• Pump Switch / Breather Valve: Auto diaphragm switch and auto breather valve
• Solar Heating: Water can warm up to 42°C in the sun, depending on conditions
• Weight: 4.8kg empty; 21kg full
• Operating Temperature: 0°C to 60°C
• Charging Temperature: 0°C to 45°C
• Battery Safety: Internal BMS with high- and low-temperature cutoffs for charging and operation
• Includes: Single 16L tank, pump housing, hose and spray gun, suction cup mount and USB-C cord

ONTAP ROAM™ 16L SPARE TANK

• Capacity: 16L
• Compatibility: ONTAP ROAM™ system only (tank only, pump housing not included)
• Tank Swap: Patent-pending quick-release latch system
• Dimensions: W17.9cm × L34.8cm × H36.0cm
• Weight (empty): 2.8kg
• Weight (full): approx. 18.8kg
• Materials: food-grade, UV stabilised
• Water and dust resistance: IP65 rated
• Rinse time: up to 6 min per full tank (spray setting dependent)
• Solar heated: up to 42°C from the sun
• Includes: 16L water tank

ONTAP LOCKABLE HOLDER × 2

• Compatibility: ONTAP ROAM™, ORIGINAL and compatible standard 22L jerry cans
• Hose Access: Connect to the outlet without unlocking or removing the unit
• Power Pass-Through: Connect the ONTAP power cord through the outside of the holder
• Materials: Laser-cut 3mm marine-grade aluminium
• Construction: No welding; designed to avoid weld fatigue and cracking from vibration
• Finish: Textured black powder coating, warranted against colour fade, chalking and corrosion
• Dimensions (each): H52.5cm × W39.0cm × D19.6cm
• Weight (each): 5.3kg
• Installation: Supplied fully assembled with mounting hardware and installation instructions. Check dimensions and your intended mounting location before installation
• Origin: 100% Australian made, designed and owned
• Warranty: 2 years, covering construction, hardware and paint